Due to the recent deadly strains of the pandemic that spread quickly across the globe, causing widespread panic, many people have started buying facemasks and respirators. However, do people really know if they are buying the right kind of protection? Here’s a short guide to facemasks and respirators. This blog presents how they are different, and how you should dispose of them after getting from the face mask manufacturer.

Facemasks

Facemasks are loose-fitting, disposable face pieces that protect the wearer’s mouth and nose from splashes and sprays. They are also designed by every face mask manufacturer to stop droplets – for example, when sneezing or coughing – from spreading from the said wearer. However, facemasks cannot keep out very small airborne particles that can contain viruses because of its very loose fit. They are also labeled as surgical, dental, isolation, laser, and medical procedure masks.

Respirators

Meanwhile, respirators are designed to protect the wearer from inhaling very small particles. Compared to a loose-fitting facemask, a respirator’s tighter fit only allows the wearer to inhale air primarily through its filter material, which traps the said particles. Because of its ability to filter out small particles, respirators are primarily used in construction and industries that involve dust hazards.

Respirators may also be used by medical personnel that has close contact with people who respiratory ailments that can be transmitted by airborne particles. These respirators should be approved by the respective National Institute for Occupational Safety and Health (NIOSH). To check if a respirator is NIOSH-approved, it must have the following information printed on the mask:

• Face mask manufacturer name or registered trademark
• Part Number (P/N), model number, or compliant name
• Kind of filter protection – filter series and efficiency level (ex. N95 or R95)
• Testing and certification approval number
• Logo, or the acronym NIOSH in block letters

When choosing a respirator, an important consideration is the kind of filter protection. The NIOSH filter series letter designates whether a filter is oil resistant – N for not-oil resistant, R for somewhat oil resistant, and P for strong oil resistance. Meanwhile, the number designates the percentage of particles that can be filtered – 95 for 95%, 99 for 99%, and 100 for 99.97%. Using this system, the NIOSH has nine categories for respirators – N95, N99, N100, R95, R99, R100, P95, P99, and P100. However, there are still no approved respirators for the R99 and R100 categories.

Fitting of Respirators is Key

Apart from considering the type of filter, respirators must also fit tightly and securely on the wearer’s face to efficiently filter out the small particles. This is why many employers have their employees “fit-test” their respirators first, by checking the fit on the face and adjusting the straps.

They are also called particulate respirators or air-purifying respirators.

Last Word

Both facemasks and respirators are disposable and intended for one-time use only. Once used, soiled, or damaged, they must be placed and secured inside a plastic bag and thrown into the trash. They must not also be shared by several people, as doing so defeats the purpose of containing the droplets or particles that may carry a potential infection risk.

A Useful Guide On Bringing The Medical Devices To The Market

Growing medical devices in the market may be a challenging task, as you will have a lot of competitors. See how a medical device manufacturer is growing in the market with their products. To help you in these efforts, continue reading the blog.

With medical devices, it is also important to wear a protective gown on the premises of the hospital due to COVID-19. Get in touch with a reliable protective product manufacturer to get a quality product and save yourself from the interaction of viruses.

Ideation:

Everything starts with an idea! Before you come with any solution, you need some problem to solve. Maybe you start from scratch to handling medical problems having no present solution. You may also strive to make the existing technology more efficient and reasonable. You can shift your focus as the project progresses, but it is important to start with a clear idea of the issue to be resolved. Consider the medical conditions and start with:

• A clear idea of the issue
• User requirements
• Existing technology

When you need to brainstorm ideas, doctors, nurses, and other medical professionals are great resources. They work on the front lines and can give a personalized perspective of the pros and cons of any existing products similar to yours. They may also tell you that there is not a single device on the market like the one you are looking to develop. This information helps assess potential market demand.

Salespersons are often overlooked, but they have brilliant ideas and can give helpful feedback about how devices are used. These are the people that receive initial feedback directly from the end-users.

Global Market Research:

Having an excellent idea for a product is not enough to guarantee its success in the market. You will also need to make sure there is a market for your product. It is advised to research any competitors to measure your proposal up against their existing products.

Here are some questions that every device manufacturer should ask themselves:

• Will my device fill all the needs?
• Who would buy this device, and where in the world could I sell it?
• What are the competitive products, technologies, services currently available?

Market research is important! Distinct countries and regions will pay different prices for the same devices. The market size dictates how much capital you can raise if you decide to go that route. While it is possible to determine the size of certain individual markets based on existing data, international markets are more difficult to gauge.

For assessing yourself against competitors, ask yourself the following questions:

• What other products serve a similar function to the product you are planning to launch?
• How is my product going to be superior to those competing products?

Creating A Prototype:

It is time to get technical! You need to consider prototyping your device to troubleshoot problems and improve some features.

Once you are satisfied with the basic design, it is time to hire a manufacturer to build a stronger prototype. When you have a working prototype, you are ready for basic feasibility studies. These influence your design choices.

Five Essential Devices Used in the Surgical Environment

The environment, the surgeons, and the place where surgery is to be conducted are important factors for a smooth and successful procedure. Another important component in this equation is the medical equipment by any medical device manufacturer. There are many essential medical devices used inside a surgical room, but there are five basic machines needed in surgery.

Sterilizer

Before anything else, the operating room, equipment, and surgical instruments need to be thoroughly sterilized. This first step (pre-surgical) is a critical procedure done before the procedure starts to avoid any potential life-threatening infections for under surgery patients. A plasma sterilizer with low temperature sterilizes heat-sensitive materials using ionized gas or gas plasma. Also, any protective gear is important and should be procured by a reliable protective product manufacturer

Surgical Light

Indeed, even with electronically controlled medical devices used to make a specialist’s occupation simpler, it is as yet the doctor who operates the patient. The shadow-less surgical light arrangement is pivotal for a specialist’s capacity to see obviously on the current technique. Surgical lights need to provide surgeons with bright, homogenous lighting during the operation that does not cast any shadows that can affect visibility.

LCD Monitor/ Patient Monitor

Today, High Definition LCD screens are crucial in operation rooms, providing doctors with high-resolution and detailed images of the procedure, even allowing surgeons for convenient movement of images around the screen. A patient monitor, also known as “Multiparameter,” or “Physiological Monitor” is an electronic machine designed to display and analyze the patient’s vital signs for potentially fatal cardiac conditions.

Anesthesia Machine

Patients given a general anaesthetic (to go be put to sleep) during an operation needs the right amount of oxygen, nitrous oxide, with an accurate concentration of anaesthetic vapour. The machine catering anaesthesia typically cared for by the nurse anaesthetists or anesthesiologists. The machine is required during surgery to give a continuous flow of medical gases for keeping the patient away from regaining consciousness.

Suction Pump

Bodily secretions tend to form during surgery, such as mucus, phlegm, and excess blood. Suction pumps kept in an operating room are used to drain and remove any excess fluids found in a human body. The pump can either block the surgeon’s visibility or clogged passageways, which can delay the procedure.

Last Word

The medical equipment industry is evolving every passing day. Different devices are designed and developed for making human lives easy. However, the above-mentioned devices will always have a status of ‘fundamental’ no matter how much medical device industry gets advanced.

With the rapid spread of the COVID-19 pandemic, it is important for everyone in public or hospitals to wear a face mask. This may prevent the spread of the virus. For the level of protection, everyone needs to buy a bulk of protective face masks from a quality Face mask manufacturer.

Why Wearing Face Mask Is Important?

Wearing a face mask can help reduce the spread of infection and the transmission of infectious germs through the air. When someone:

• Coughs
• Talks
• Sneezes

Viruses may be released into the air, infecting people around. Face masks are used to prevent cross-contamination as part of an infection control strategy.

According to professionals, face masks help to inhibit the spread of COVID-19. When a person infected with this virus wears a face mask, their chances of infecting others decrease. When you are around someone who has COVID-19, you can also benefit from wearing a face mask. Try to avoid interaction with symptomatic people.

When you are with people who don’t live in your house or when social distance isn’t possible, wear a face mask. This includes both public and private places like:

• A store
• An office
• A gym.
• Restaurant

Even if you are at home, if you are caring for loved ones who have been tested positive for COVID-19, wear a face mask when you are near them.

Although wearing a face mask is necessary for everyone, but this cannot be followed by everyone. This happens due to:

• Disabilities
• Mental health problems
• Breathing problems

It is also not recommended for children under the age of 2 to wear the mask. Do not share a mask that you have already worn, even once. This may transmit the diseases to another person.

Apart from a face mask, there is also an increase in medical devices along with the pandemic. Hospitals, clinics, and experts need to contact a reliable medical device supplier.

Tips for Taking Care of your Face Mask:

It is important to wear your face mask regularly and correctly. Choose a face mask that covers your face properly and fits perfectly. Nowadays, cloth masks are also in use. The best materials for face mask cloth are:

• Chiffon
• Cotton
• Natural silk

You can either dispose of your face mask or reuse it. If you are reusing it, it is important to take good care of it. Here are some tips to follow to take care of your face mask.

• While you are wearing the face mask, avoid touching your mask.
• Before putting on your mask, wash your hands. Do the same after wearing.
• While you are taking off your mask, avoid touching your eyes, nose, and mouth.
• When you have taken off your mask, soak it in the bleach solution for almost 5 minutes and wash it by hand.
• Using the warmest water, wash your mask in a tub and also make use of detergent.
• Rinse your mask with warm water thoroughly and let it dry in the sun.

Medical Safety Products to Reduce Medical Expense

Medical products are equipment that look after the recovery of a patient from any sort of illness. A medical device supplier includes products that look towards maintaining proper hygiene and health. These tools are used by medical practitioners to offer support to the poor health condition of the patients.

If the state approved protective product or medical supplies with preventive capacity are used, it can minimize the entire health care expense in the future. These are precautionary objects offered by almost every protective product manufacturer that are used as disinfectants. They save the patient against any contamination during treatment or post-surgery.

Some products related to medical safety:

Medical safety products are used for treating patients who are of state approved standards. Every protective product manufacturer is supposed to manufacture its product following the set medical standards by the government.

These are produced to offer proper protection to the ailing from any contamination and infection. They are also of superb hygienic quality. A few important medical safety products are:

Sanitizers, soaps, and disinfectants:

These things are of utmost importance as cleanliness depend upon them. Health department of particular states have to be specific about complete cleanliness. Surgeons, doctors, or pathological examiners need to use these products to give hygienic protection to the patient. They need to properly wash their hands by a medicated soap for washing away any germs.

Exam gloves:

These gloves are worn during pathological examinations to adhere to the strictest hygiene standards.

Sterilized scissors:

Sterilized scissors are used for surgical purposes and should properly be sterilized to maintain hygiene. It will prevent the occurrence of infections as well.

Disposable syringes:

Syringes are used for injecting intravenous medicines or for blood collection for any test for detecting any disease, which must be disposed after single use. This takes care of the the patient’s safety. They don’t contract contaminated through any disease carried on from the person who previously used it.

Containers:

The containers having the sample of pathological product or blood for examination should also be sterilized.

Final Words

There are various suppliers of these products that are available in the market. The best choice would obviously be the regulatory approved ones. They are checked for safety standards and superb maintenance of hygiene.

These are unavoidable in the medical field. The primary criteria for the health care industry are hygiene and cleanliness. These handy tools are extremely beneficial in providing patients with security. The reputation of any health-care organization is dependent on these tools.  

Three Key Factors to Consider in a Medical Equipment Manufacturer

You would encounter an innumerable amount of manufacturers of various medical products. Also, we do understand the fact that different healthcare facilities need a range of medical products. To serve various requirements, many suppliers are dealing with these products and every medical device manufacturer tries to offer products that last long.

When it comes to sourcing a medical device supplier, you need to consider that doctors, physicians, and other personnel are involved in the medical profession. Thus you need to cater to the varying needs of diverse medical products users.

You can sense the change in the product as the condition of your clients improve and with the expert advice offered by a professional and reliable medical practitioner. Thus, you can continue to use the equipment which is the best and suitable for you and can remain the same in near future.

Quality and Medical Equipment Go Hand in Hand

It is a glaring fact that every medical lab needs premium quality products; even if they need gowns, they require a top-quality gown manufacturer. So, if you are looking for some high-quality medical gear, you should contact and genuine medical product suppliers. Also, you must shortlist the one that offers a huge stock of different types of products.

If you are operating a medical lab, it would be a wise and practicable decision to choose one of the reliable medical product wholesalers so that you can pick the stock in bulk.

However, there are quite a few factors you need to keep in mind while choosing a medical device manufacturer. Among many, three key factors are mentioned below.

Quality of the Product –

Undoubtedly, quality plays the most crucial role when we talk about choosing laboratory products. If you need flawless results, you will depend on what quality items you are using in your lab.

Thus, you have to buy branded medical equipment from the supplier wholesale so that you can use it whenever you need it.

Services –

If you desire the medical lab techniques to execute smoothly, you must make the most out of the related services offered by the manufacturer. The services offered include after-sales support, in-house repairs, and other services as well.

Ease of Buying the Products –

There are quite a few reputable suppliers that maintain their presence online. Their online existence becomes convenient for the buyers to select and buy the right medical device after a detailed comparison of specifications and prices of the products.